Description

Multi-sided glue joint bits make joining up multi-sided projects easy. Columns, barrels and planters to name a few will grace your décor with minimal effort. Using this bit, you will only need to cut one end as opposed to two (such as with miter joints) reducing cutting time in half! This bit is designed to cut at the correct angle providing extra gluing surface and a strong mechanical joint. When glued together, the routed end hugs the mating piece preventing any slippage. Edges can be cut either flush or protruded, then sanded down later to the desired finish. Two flute carbide cutters & 1/2" shank.

Maintenance:

Keep the tool clean, clean up the resin, sawdust and other contaminants, and use standard
solvents to clean the tool.
Apply a small amount of oil to prevent rust on the tool surface, cleaning tool handle stains,
in order to prevent the use of the phenomenon in the process of slip.
When using, please pay attention to safety, normal use, so as not to produce an accident