Worldwide Shipping And Paypal Buyer Protection :Free  Shipping for Orders over $49 +🔥 SUMMER SALE USE CODE "SUMMER10" TO GET 10% OFF ☀
USD

Hair Trimmers (35)

Brand
Hair Trimmers
Electric hair clippers are generally composed of a fixed push tooth, a movable push tooth, an adjustment handle, a housing, and electrical components installed in the housing. Many parents with children like to give their children a haircut, which saves money and is convenient. How to disassemble the cutter head of the electric clipper after using too many times? The first thing to note is to cut off the power supply, in order to prevent accidentally touching the switch when removing the cutter head and turning on the switch to accidentally hurt yourself.



The difference between electric clippers and hair clippers:
What is a hair clipper

Generally, the hair clipper adopts a separate structure, and the blade can be detached to facilitate cleaning with water after each use. It is recommended to put a few drops of lubricating oil after cleaning to protect the cutter head.

The power composition of the hair clipper, the faster the speed, the more the power is. Generally, the hair clipper used for adults has a higher speed, because adult hair is harder, but the relative vibration is relatively large; baby hair is soft, the speed is average, and the vibration is relatively small.

What is a clipper

Electric clippers are tools for haircuts and hairdressing. Electric hair clippers are generally divided into two types, one is plug-in type and the other is rechargeable.

Electric hair clippers are generally composed of fixed push teeth, movable push teeth, adjustment handles, housing and electrical components installed in the housing. When in use, they must be powered by electricity, mostly alternating current.

Summary: In principle, the hair clipper and the electric clipper are the same haircut tool, but the electric clipper is more suitable for men. When you buy, you can compare and choose according to the needs of family members.

Electric hair clippers purchase skills:
1. Beautiful appearance, light weight, flexible operation, labor saving, low vibration and low noise.

2. The blade has good hardness, sharp cutting edge of scissors, and it cuts briskly and freely, without hair pulling and pinching.

3. The moving range of the upper blade is not less than 1.5mm. The contact surface of the lower blade should be flat and smooth. The blade should have a variety of specifications such as coarse, medium, and fine.

4. The electric clipper is operated by hand when it is used. It is an electric appliance that directly contacts the human head. Therefore, its electrical performance requirements should be particularly strict, the insulation must be good and reliable, and there should be no leakage. At the same time, the full load is used for 8 minutes, closed for 4 minutes, and then used for 8 minutes. The temperature rise of the lower blade should not be higher than 15°C, and the temperature of the electromagnetic coil should not be higher than 65°C.

5. When in use, the noise should generally not be greater than 70dB, that is, it should not make people feel annoying.

6. It can also be used normally when the voltage fluctuates by 10%.

7. The surface of plastic and electronic parts should be bright and clean, without pitting, markings, bubbles, deformation, etc.

8. The gap between the upper blade and the casing should not exceed 0.75mm, the upper and lower blades should be neat and there should be no skew.

9. The back groove of the lower blade is vertical and clear, the tooth groove is centered, there is no gap or obvious defect, and the tooth tip should be smooth.

10. The surface of metal parts (except blades) should have an anti-corrosion protective layer, and the coating should be fine and shiny. There should be no spots, pits, pinholes, bubbles, shelling, and bottom exposure.

How to install electric clippers:

    Specific operation

    1. Clean the blade of the electric clipper first.

    2. Align the buckle under the cutter head with the buckle groove of the electric clipper host.

    3. After aligning the buckle groove, press inward.
    The reason why the cutter head does not move

    If you are rechargeable

    1. Dead point of the motor;

    2. No electricity (battery failure, circuit board failure

    3. The eccentric wheel falls off or is broken, and the eccentric wheel may slip

    AC electromagnetic

    1. The blade is crushed due to too much load;

    2. The coil is broken;

    3. The blade is rusty
    Repair method

    If you want to fix it yourself, you can try the following methods:

    First of all, it is necessary to determine that the power is normal, then disassemble the blades and clean them with kerosene or alcohol before installing them. It is best to drip a small amount of sewing machine white oil when using it!

How to disassemble the electric scissors head:
Steps

1. The first thing to pay attention to is to cut off the power supply. In order to prevent accidentally touching the switch when disassembling the cutter head and turning on the switch, you must cut off the power before disassembling the cutter head.

2. Pay attention to the position of the hand when disassembling the cutter head.

Note: The thumbs of both hands must be pressed at the same time on both ends of the blade to balance the force, otherwise it is easy to break the blade or even hurt yourself.

3. According to the above steps, push the thumbs of both hands forward and hear the "click" to confirm that the cutter head is open.

The cutter head is so easily removed.

Detailed diagram of the process:

1. Cut off the power supply.

2. Pay attention to the position of the hand when disassembling the cutter head. Press the two ends of the cutter head to be balanced.

3. Gently push both thumbs forward.

4. The cutter head opens after hearing the "click" sound.

Precautions for the use of electric clippers

Don't choose the kind of battery. If you accidentally forget to take out the battery, if it is not used for a long time, it will be discarded. Moreover, the battery is a waste of money. The most important thing is convenience, so it is best to choose the kind The rechargeable baby hair clipper is better, so you don’t have to worry about the battery problem and it is very comfortable to use.

1. Before each use of the baby hair clipper, you need to check the integrity of the blade of the baby hair clipper. If the blade is damaged, it may cut the skin;

2. If you use the electric hair clipper for too long, the main body and the blade may become hot. At this time, it is recommended that you shut down for 5 to 10 minutes to prevent the baby from being uncomfortable due to overheating;

3. Remember to disconnect the power after each use;

4. Dry hair is easier to trim than wet hair;

5. Do not put the baby hair clipper in the water or trim the hair that is too moist, otherwise it will easily cause circuit failure;

6. After failure, it is strictly prohibited to disassemble, repair or modify the hair clipper without permission;

7. When trimming sideburns, ears and other parts, don't use too much force and don't get too close to the skin;

8. Baby hair clippers are specially designed for babies' haircuts. Do not use them to repair pets' hair;

9. Remember to clean the hair on the electric hair clipper after disconnecting the power;

10. Put the baby hair clipper out of reach of infants and young children.

Hair Trimmers

Join our community

Subscribe To Our Newsletter