Worldwide Shipping And Paypal Buyer Protection : DTCMRO Smarter shopping,Better Living!

Hand Tool Sets (13167)

Hand Tool Sets,Hand Tool Sets,hand tool sets at lowes,hand tool kits, hand tool kits for sale
1 2 3 4 ... 264
Hand tools can be divided into wrenches, pliers, screwdrivers, tape measures, hammers, sockets, cutting, scissors, sets, and auxiliary tools such as tool carts, etc. according to their use. Each category is different. Model.
Wrenches include open-end wrenches (machine-handed), double box wrenches, ratchet wrenches (quick wrenches), combination wrenches (composite wrenches), tubing wrenches, T-type socket wrenches, cross socket wrenches, adjustable wrenches, etc.
Pliers include wire cutters, needle-nose pliers, diagonal pliers, retaining ring pliers, slip joint pliers, water pump pliers, pipe pliers, power pliers and other categories;
The screwdriver has a word, cross, Pozi, hexagon, pattern and other categories;
The sleeves are divided into ordinary sleeves, flower sleeves (E-type sleeves), screwdriver sleeves (BIT sleeves), spark plug sleeves, powerful sleeves and so on. According to the common specifications, there are three kinds of specifications: 1/4", 3/8" and 1/2", "is expressed in inches; at the same time, each specification is divided into 6-point socket and 12-point socket;
Hammers are divided into claw hammer, fitter's hammer, round head hammer, rubber hammer and installation hammer;
Cutting categories include files, diamond files, tin snips, aviation scissors, utility knives, square pipe saws, pipe cutters, bolt cutters, etc.;
In terms of materials, there are Luo vanadium steel, carbon steel, alloy steel and so on.

Hand tool classification:

screwdriver:
A tool used to turn a screw to force it into place. It usually has a thin wedge-shaped head that can be inserted into a slot or recess in the screw head-also known as a "screwdriver".
wrench:
Use the principle of leverage to turn bolts, screws, nuts and other threaded hand tools that hold the openings of bolts or nuts or sets of holes. Wrenches are usually made with clamps on one or both ends of the handle to apply external force to the handle to apply external force to turn the bolt or nut to hold the opening or sleeve of the bolt or nut. When in use, an external force is applied to the shank along the direction of thread rotation, and the bolt or nut can be turned.
hammer:
It is a tool to knock an object to move or deform it. It is most commonly used to knock nails, correct or break objects. Hammers come in various forms, the common form is a handle and top. One side of the top is flat for striking, and the other side is a hammer head. The shape of the hammer head can be like a horn or a wedge, and its function is to pull out a nail. There is also a round head-shaped hammer head.
Test pencil:
It is also called "electric pen" for short. It is an electrician's tool used to test whether there is electricity in the wire. There is a neon bulb in the pen body. If the neon bulb glows during the test, it indicates that the wire has electricity or is a live wire of the passage. The tip and tail of the test pencil are made of metal materials, and the barrel is made of insulating materials. When using the test pen, be sure to touch the metal part of the end of the test pen with your hand, otherwise, because the charged body, the test pen, the human body and the earth do not form a loop, the neon bulb in the test pen will not emit light, causing a misjudgment, and the charged body Uncharged.
tape measure
Tape measure is a commonly used tool in daily life. What you often see is the steel tape measure, which is commonly used in construction and decoration, and is also one of the essential tools for the family. Divided into fiber tape measure, tape measure, waist measurement and so on. Luban ruler, Feng Shui ruler, and Wen Gong ruler are also steel tape measures.
Wallpaper knife:
A kind of knife with a sharp blade, used to cut wallpapers and the like, hence the name "wallpaper knife", also known as "art knife". It is often used in the decoration, decoration, and advertising plaque industries. [2]
Electrician's Knife
Electrician's knife is a cutting tool commonly used by electricians. An ordinary electrician's knife is composed of a blade, a knife edge, a knife handle, and a knife hanger. When not in use, retract the blade into the handle. The root of the blade is hinged with the handle, with scale lines and scale marks on it, a screwdriver bit is formed on the front end, and a file surface area is machined on both sides. The blade has a concave curved blade, and the end of the blade forms a blade tip. The handle is provided with a protection button to prevent the blade from rebounding. The blade of the electrician's knife has multiple functions. It only needs one electrician's knife to complete the operations of connecting the wires. There is no need to carry other tools. It has the beneficial effects of simple structure, convenient use and diverse functions.
Hacksaw
Including hand saws (household, woodworking), cutting saws (branches trimming), folding saws (branches trimming), hand bow saws, edge saws (woodworking), slitting saws (woodworking), cross-cut saws (woodworking)
Spirit level
The spirit level has a horizontal bubble, which can be used to inspect, measure, and debug whether the equipment is installed horizontally.
Wire cutters
Wire cutters are a kind of clamp and cutting tool, which are composed of a clamp head and a clamp handle. The clamp head includes a jaw, a tooth, a knife, and a guillotine. The role of each part of the pliers is:
①The tooth opening can be used to tighten or loosen the nut;
②The knife edge can be used to cut the rubber or plastic insulation layer of soft electric wires, and it can also be used to cut electric wires and iron wires;
③The guillotine can be used to cut hard metal wires such as electric wires and steel wires;
④The insulated plastic tube of the pliers can withstand voltage above 500V. With it, you can cut wires with electricity. [2]

Needle-nose pliers:
Also called trimming pliers, it is mainly used to cut single and multi-strand wires with a thinner wire diameter, as well as for bending single-strand needle-nose pliers wire joints, stripping plastic insulation, etc. It is also an electrician (especially an internal electrician) One of the commonly used tools. It is composed of a pointed tip, a knife edge and a pliers handle. The electrician's needle-nose pliers are covered with an insulating sleeve with a rated voltage of 500V. Needle-nose pliers have sharp heads and are used in small spaces. The operation method of using needle-nose pliers to bend the wire connector is: first fold the wire head to the left, and then bend the screw to the right in a clockwise direction.
Wire stripper:

The wire stripper is one of the tools commonly used by inside electricians, motor repairs, and instrument electricians. Its appearance (as shown in Figure 1). It is composed of knife edge, crimping mouth and clamp handle. The clamp handle of the wire stripper is covered with an insulating sleeve with a rated working voltage of 500V. Wire strippers are suitable for stripping plastic and rubber insulated wires and cable core wires. The method of use is: put the thread to be stripped into the cutting edge of the pliers, pinch the two pliers handles with your hands, and then loosen it, the insulation will be separated from the core wire.

Seiko hand tools
1. Use appropriate saw blades for work, such as 14 teeth per inch for cutting hard or thick soft metals; 18 teeth per inch for tool steel, iron pipes, hard metals, etc.; and 24 teeth per inch for metal plates , Sawing of metal pipes and thin iron bars.
2. Push the saw forward and lift it gently when pulling it back.
wrench
1. The wrench of appropriate size should be selected according to the nature of the work.
2. When using the adjustable wrench, force should be applied to the fixed side, never force to the movable side.
3. If the wrench opening is worn or slipping during use, it should not be used anymore to avoid slipping.
4. Do not use a wrench as an iron to strike. 5. Do not put a pipe on the handle end of the wrench to increase the torque of the wrench. [3]
Long square
Long square: Press the inside of the first side of the square, leaning against the edge of the board, and draw a pencil along the inside of the second side of the square to draw a vertical line.
screwdriver
1. Choose an appropriate screwdriver according to the size and shape of the screw head groove.
2. The handle of the screwdriver should not be knocked with a hammer. If the handle is damaged, it should be replaced immediately.
3. Do not use the screwdriver as a chisel or lever.
4. An electric screwdriver should be used to check the current, and a general screwdriver cannot be used to check high-voltage electricity.
5. The blade of the screwdriver cannot be ground to avoid damage to the hardened surface.
6. The screwdriver should not be put in the pocket of clothes or trousers to avoid injury in collision or fall.
C clip
The C-type clamp is used to fix the work object. When clamping the object, the shaft and rocker face down. Generally, use a 3-inch clamp or a 4-inch clamp {refer to the maximum thickness that can be clamped}.
pliers
1. The pliers are only used to fasten, insert and remove all kinds of pins and nails, and to cut or tighten all kinds of wires.
2. Pliers cannot be used to tighten or knock bolts or nuts.
3. The handle of the pliers cannot be beaten or lengthened to increase the clamping or cutting power.
Woodworking knife
Woodworking knives are generally used to trim irregular parts of the details. The blade is a whole piece and is less likely to break.

Purchasing tips: Which tools are necessary for the household hand tool set?

Generally, households will prepare some tools more or less. In the decoration and daily life, changing a light bulb, making a shelf, handling raised nails and other repairs are often used, the frequency of use is very high, no need to find a special repairman , Which saves time and money. So what are the necessary tools for the family tool kit?

1. Screwdriver

Usually screwing a screw, installing a computer, and furniture are very useful. Usually there is a thin wedge-shaped head that can be inserted into the slot or notch of the screw head. There are mainly two types: one word and cross. Hexagonal screwdrivers are also common, including inner and outer hexagons.

2. Wrench

There are basically two types of wrenches, dead wrenches and adjustable wrenches, which use the principle of leverage to turn bolts, nuts, screws and other threads. Usually there are clamp handles on one or both ends of the handle. When used, the handle is placed in the direction of the thread rotation. By applying external force, bolts, nuts, etc. can be turned.

3. Tape measure

You can test the length, width, and height of the object. Sometimes the space is limited. The items to be purchased must be in accordance with the size. Therefore, the length and width of the object can be measured by a tape measure, which is conducive to the choice of the size of the purchased furniture, avoiding the size The trouble caused by the return and exchange.

4. Hammer

It is composed of a hammer head and a hammer handle. It is most commonly used for hammering nails, correcting or knocking objects away. When using a hammer, check whether the connection between the hammer head and the hammer handle is firm, otherwise it will be injured.

5. Test pencil

Used to test whether there is electricity in the wire. When using the test pen, be sure to touch the metal part of the end of the test pen with your hand, put your index finger against the cap end of the pen, gently pinch the pen with your thumb, middle finger, and ring finger, and insert the metal pen tip into the socket hole.

6, utility knife

Commonly known as a carving knife or wallpaper knife, it is a knife for fine arts and handicrafts, mainly used to cut softer things. There are different sizes of utility knives, the large one is about 20 cm, the small one is about 10 cm, you can choose according to the actual situation.

7. Pliers

Pliers can replace human hands and handle some sharp and sharp tools, such as removing nails from wooden boards and pulling glass out of walls. They are useful and prevent hands from being scratched. There are many types of pliers, such as wire cutters, needle-nose pliers, diagonal pliers, round-nose pliers, etc.

Hand Tool Sets,Hand Tool Sets,hand tool sets at lowes,hand tool kits, hand tool kits for sale

8. Hacksaw

Commonly known as a hand saw, it can cut smaller round steel, angle steel, flat steel and workpieces, and can also be used to saw small pieces of wood and plastic products.

Hand Tool Sets,Hand Tool Sets,hand tool sets at lowes,hand tool kits, hand tool kits for sale

In daily life, home maintenance is the most simple tasks such as screwing screws, nailing nails, changing light bulbs, etc. Therefore, you only need to choose some common tools when purchasing hand tools.

Hand Tool Sets,Hand Tool Sets,hand tool sets at lowes,hand tool kits, hand tool kits for saleHand Tool Sets,Hand Tool Sets,hand tool sets at lowes,hand tool kits, hand tool kits for saleHand Tool Sets,Hand Tool Sets,hand tool sets at lowes,hand tool kits, hand tool kits for saleHand Tool Sets,Hand Tool Sets,hand tool sets at lowes,hand tool kits, hand tool kits for sale

Join our community

Subscribe To Our Newsletter